Sennheiser EM 100 G4 Rackmount Receiver
Discontinued
EAN: 4044155228694
Price: Contattaci per il prezzo/
Call for price!
Call for price!
Contact us:
Rated 0/5 (0 Reviews)
Sennheiser EK 100 G4 Camera Receiver
The EM 100 G4 is a half-rack wireless receiver in a robust full-metal housing that features an improved interface with intuitive high-contrast LCD display and a dedicated escape button.
The frequency bank is adjustable in 25 kHz, and can be programmed with up to 12 preset channels.
The units are fully compatible with G3, G2, and G1 transmitters.
FREQUENCY BAND:
A : 516 - 558 MHz
A1 : 470 - 516 MHz
G : 566 - 608 MHz
B : 626 - 668 MHz
A : 516 - 558 MHz
A1 : 470 - 516 MHz
G : 566 - 608 MHz
B : 626 - 668 MHz
| Receiver | |
|---|---|
| Type of Receiver | EM 100 G4 half-rack mountable true diversity UHF |
| Receiving Frequency | Maximum 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels |
| Switching Bandwidth | Up to 42 MHz |
| Nominal/Peak Deviation | ±24 kHz / ±48 kHz |
| Receiver Type | True diversity |
| Sensitivity | < 2.5 μV for 52 dBA (with HDX, peak deviation) |
| Adjacent Channel Selectivity | Typically ≥ 65 dB |
| Intermodulation Attenuation | Typically ≥ 65 dB |
| Blocking | ≥ 70 dB |
| Squelch | Low: 5 dB µV Middle: 15 dB µV High: 25 dB μV |
| Pilot Tone | Squelch: Can be switched off |
| Antenna Inputs | 2 x BNC sockets |
| Compander | Sennheiser HDX |
| EQ Presets | Switchable, act on line and monitor outputs Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) |
| Signal to Noise Ratio | ≥ 110 dBA (1 mV, peak deviation) |
| Total Harmonic Distortion (THD) | ≤ 0.9% |
| AF Output | 1/4" (6.3 mm) jack socket unbalanced, +12 dBu XLR socket balanced, +18 dBu |
| Output Range | AF Out: 48 dB (3 dB steps) |
| Temperature Range | 14 to 131°F (-10 to 55°C) |
| Power Supply | 12 VDC, 300 mA |
| Dimensions (W x L x H) | 7.48 x 8.35 x 1.69" (190 x 212 x 43 mm) |
| Weight | 2.16 lb (980 g) |
